Flat braided shunts

 

• Pressed copper connectors, tin coated or silver coated on request

• Single wire Cu ETP UNI 1977-78:2000
0,20 standard 0,10 on request

    You are in: Braided shunts

Red copper Tinned copper Cross-Section
mmq
A
mm.
B
mm.
S
mm.
L.
mm.
Ø Hole D
mm.
Terminal Drill Current Flow
AC Amps
CRS 10-200/10 CSS 10-200/10 10 10 10 3,5 200 5 W1 85
CRS 10-200/12 CSS 10-200/12 10 12 12 3,2 200 6 W1 85
CRS 16-200/15 CSS 16-200/15 16 15 15 3,5 200 7 W1 120
CRS 25-200/17 CSS 16-200/17 16 17 17 3,3 200 9 W1 120
CRS 25-200/20 CSS 25-200/20 25 20 20 3,7 200 9 W1 150
CRS 25-200/22 CSS 25-200/22 25 22 22 3,5 200 9 W1 150
CRS 25-200/25 CSS 25-200/25 25 25 25 3,3 200 11 W1 160
CRS 35-200/22 CSS 35-200/22 35 22 22 4,1 200 9 W1 190
CRS 35-200/25 CSS 35-200/25 35 25 25 3,8 200 11 W1 200
CRS 50-200/25 CSS 50-200/25 50 25 25 4,6 200 11 W1 260
CRS 50-200/30 CSS 50-200/30 50 30 30 4,2 200 13 W1 280
CRS 50-250/35 CSS 50-250/35 50 35 35 3,8 250 13 W1 300
CRS 75-200/30 CSS 75-200/30 75 30 30 5,2 200 13 W1 320
CRS 75-250/35 CSS 75-250/35 75 35 35 4,8 250 13 W1 330
CRS 100-200/30 CSS 100-200/30 100 30 30 6,3 200 13 W1 350
CRS 100-200/35 CSS 100-200/35 100 35 35 5,6 200 13 W1 360
CRS 100-250/40 CSS 100-250/40 100 40 40 5,2 250 13 W1 370
CRS 120-200/30 CSS 120-200/30 120 30 30 7,0 200 13 W1 400
CRS 120-200/35 CSS 120-200/35 120 35 35 6,5 200 13 W1 420
CRS 120-250/40 CSS 120-250/40 120 40 40 5.8 250 13 W1 450
CRS 150-200/30 CSS 150-200/30 150 30 30 8,4 200 13 W1 500
CRS 150-200/35 CSS 150-200/35 150 35 35 7,5 200 13 W1 520
CRS 150-250/40 CSS 150-250/40 150 40 40 6,8 250 13 W1 550
CRS 150-250/45 CSS 150-250/45 150 45 45 6,2 250 13 W1 570

Widths, lengths, cross-sections and bores are not included in table above, they are
provided at request.
* All information concerning current flow is not binding, the values shown above are
approximate values. The manufacturer shall not be held responsible under any
circumstance.